Self-supporting steel-joint construction with electro-hydraulic unit, according to the valid regulations such as DIN EN 1398. For welding at the rear and front, with angle 100 mm at the rear.
Dimensions:
Order width: 2,000 mm
Order length: 2.500 mm
Pit width: 2.025 mm
Pit length: 2,570 mm
Height: 595 mm
Folding wedge: 395 mm
Load capacity:
Nominal load according to EN 1398 120 kN as standard.
Height compensation (depending on order length):
Level compensation above OFF: + 290 mm
Level compensation below OFF: - 290 mm
According to DIN EN 1398 and BGR 233, a maximum slope of 12.5% (approx. 7°) is permissible.
Construction:
Torsion-resistant loading bridge construction with 2-cylinder technology, platform made of profiled, anti-slip steel, 8/10 mm thick, with folding wedge made of profiled, anti-slip steel, 12/14 mm thick, 395 mm long, with open, self-cleaning folding wedge hinge. Folding wedge type R (up to 2,000 mm width standard), straight.
Reinforcing profiles on underside of platform Surface: All steel surfaces are sandblasted or pickled and galvanised.
Drive:
With electro-hydraulic drive, motor power 1.1 kW,
supply voltage 400 V, protection class IP 54.
Control 420 S:
Shielded control housing, protection class IP 65,
supply voltage 400 V, with integrated membrane push-button for actuation with continuous pressure. Emergency stop switch (all-pole disconnection). Restart interlock.
Temperature range: Standard version suitable for temperature range (under the loading bridge) from approx. -10 to +40°C. Special oil required for colder and warmer temperatures.
required.
Incl. gap seal
We'll inform you if the price of this product will be changed according to your price alert.